Vest Airbag Motoairbag Fast Lock D.P.I. Mab V 3.0 D4036N

Specifications:

D.P.I. airbag vest Mab v3.0 D4036N
Colour: black/fluo yellow
Material: high tenacity polyester with perforated structure
Internal part made with 3D material that allows air to pass through the cavities
2 airbag systems: 1. Rear airbag for full-width back, sacral and cervical protection. 2. Front airbag for chest, abdomen and neck protection
Equipped with Fast Lock technology with analog accelerometer to manage accident recognition in a complete and reliable way
Inflation time: 80 milliseconds (for both airbag systems)
Total volume 25 liters (15 liters rear airbag and 10 liters front airbag)
Rear airbag weight: 800 g
Front airbag weight: 600 g
Once activated, the MAB can be recharged in a few minutes, using the recharge kit, after checking as described in the manual (kit to be purchased separately)
Equipped with an external pocket for document holders
Fluorescent inserts and reflective parts increase the degree of visibility while riding
Lateral adjustments via hinges
Additional side tape adjustments if the MAB is used in summer over a light jacket or in winter over a triple layer jacket
Internally there is a belt, at waist height, to be adjusted and connected to keep the MAB always in the correct position, both while driving and in the event of activation
Elastic inserts on the sides and shoulders that expand in the event of activation to allow both the two airbag systems to expand correctly and to ensure that the rider is not oppressed by the airbag system: with the airbag inflated it is still possible to continue ride, get off the bike, turn your head to look around, breathe normally
Equipped with valves for automatic deflation: the protective state of the MAB lasts about 30 seconds and then deflates completely within a few minutes
Fast Lock technology: through a synchronization system, it allows the airbag to be activated closest to the impact situation (e.g. in a frontal impact), the front airbag is activated in advance and the rear one after a few thousandths. For impacts from a rear-end collision, first the rear airbag and then the front one. In any case, both airbags are activated)
The vest has slots that allow the Fast Lock to come out of the vest. The Fast Lock, after activating the MAB, releases and remains attached to the saddle
Equipped with an anti-accidental activation system: before activating the airbag system it is necessary to extend the cable, overcome the elastic recoil force of Fast Lock and apply a load of 15 kg. A small sticker is also included to put on the dashboard to remind you of the first use
New design allows it to be worn over any type of jacket in a very comfortable way, especially at shoulder height, it integrates well with the shoulder protectors present in motorcycle jackets
Fast Lock is compatible with the Mini Frog miniaturized quick release
100% reliable mechanical trigger
Rear airbag residual force after impact test 1.4 kN (AIRBAG Level 1 limit = 4.5 kN; AIRBAG Level 2 limit = 2.5 kN)
Front airbag residual force after impact test 0.8 kN (Level 1 AIRBAG limit = 4.5 kN; Level 2 AIRBAG limit = 2.5 kN
AIRBAG EN1621/4 Level 2 DC certified front airbag (Maximum level)
AIRBAG EN1621/4 Level 2 FB certified rear airbag
EN1621-1 Level 1 certified elbow shoulder protectors
Package contents: certification document as AIRBAG for MOTORCYCLISTS EN 1621/4 - Certificate of conformity - Use and maintenance manual - Strap to pass around the saddle to create the Fast Lock attachment point (alternatively see strap saddle pad) - Reminder sticker - Identity card with the MAB serial number to be registered on the site. Registration is always free, it allows access to the direct assistance service with the parent company and the memo service for periodic review is offered (always free of charge) (every 4 years)
Original D.P.I. product

Vespa "Graphic" gray/yellow cotton warmer

Descrizione

Original cotton warmer vespa "graphic" gray / yellow

Dettagli

Related Products